Defibrillator

Defibrillator

Model                          : SANJEEVANI 1004

Manufacture                   : Nasan

Country of Origin        : India

Key Features:

  • Offers variable energy level selection:(2,3,5,7,10,20,30,50,70,100,150,200 Joules)
  • Adult & pediatric paddles support.
  • ECG through Paddle
  • Printer 2”
  • Parameters – ECG, SpO2, NIBP

Technical Specification:

General:

Display : 7” Colour TFT

Display area : 150 mm x 90 mm

Dimensions : H300 x W 230 x D210 mm(Max) without Paddle

Weight : Approx. 5.0 Kg

Power Supply:

AC mains through adaptor                                                                  2

Input : 150 – 276 VAC, 50 Hz, 1 Ø

Output : 17V @ 4 A.

Battery : 11.1 V 4Ah. Rechargable

Back-up time : 3 hours min. on full charge in ECG mode 70-100 shock

of 150 Joules deliveries (Full charge).

Power consumption : 30 Watts (max.) in ECG mode

Environmental

Operating Temp. : -5ºC to +50 ºC

Humidity : up to 95 % non-condensing

ECG:

Frequency response : 0.5 Hz to 35 Hz

Patient isolation : Optical isolation

Lead selection : Lead I, II and III

Gain setting : 0.5, 1.0 and 2.0

CMRR : :> 90 db

Sweep Speed : 12.5, 25.0, 50.0 mm/sec

Digital filter : Digital signal processing for good quality of ECG

NIBP Systolic, Diastolic and Mean arterial pressure.

Method : Oscillometric.

NIBP interval : User selectable – 3 min to 120 min

Modes : Manual, auto.

Cuff deflation : Automatic.

Safety features : Automatic deflation if cuff pressure exceeds

280 : mmHg

Patient Type : Adult, Pediatric, Neonate

Heart Rate:

Range : 10 – 250 BPM

Accuracy : +/- 2 BPM

Resolution : 1 BPM

Tone : Beep on every QRS detected

Low alarm limit range : 10 – 245 (step of 1)

High alarm limit range : 10 – 250 (step of 1)

SpO2 Plethysmograph trace of 4 seconds.

Range : 0 – 100%.

Accuracy : 70 – 100% +/-2% , 50 – 69% +/-3 %.

Pulse rate : displayed when PR is deselected.

Pulse beep : Stepless volume control.

PR Range : 30 to 250 bpm ( +/- 2 bpm )

Pitch variation : with change in oxygen saturation

Printer

Paper Type : Thermal paper 50/55mm width, 20 meters length for 2 inch printer

Event Printing : Prints 5 Seconds pre & post ECG with Date, Time, Energy and

mode, Shock Status

ECG in Defib Mode : Prints last 10sec ECG through paddle

Print Annotates : Time, Date, Mode, lead name, gain, sweep speed

in Defib Mode

ECG in Monitor Mode : Prints last 10 ECG through cable

Print Annotates : Time, Date, selected Lead name, Gain, Sweep speed

in Monitor Mode

Manual Defib : Prints the status of Shock, Energy, Date and Time

Defib:

Operating Mode : Manual

Waveform : Biphasic

Energy : 2 to 200 joules in 12 steps selection

Synchronous : Energy delivery begins within 60 ms of the QRS Peak

Charging Time : Less than 8 seconds

Paddle Assembly : External paddle assembly with coil retractable high

voltage cable. Adults & Pediatric paddle integrated to

same handle

Check Mode : Manual test mode

Operation : By front Panel Keyboard, Encoder & ON-OFF by front

Panel Push button

Leave a Reply

Your email address will not be published. Required fields are marked *