Model                          : SANJEEVANI 1004

Manufacture                   : Nasan

Country of Origin        : India

Key Features:

  • Offers variable energy level selection:(2,3,5,7,10,20,30,50,70,100,150,200 Joules)
  • Adult & pediatric paddles support.
  • ECG through Paddle
  • Printer 2”
  • Parameters – ECG, SpO2, NIBP

Technical Specification:


Display : 7” Colour TFT

Display area : 150 mm x 90 mm

Dimensions : H300 x W 230 x D210 mm(Max) without Paddle

Weight : Approx. 5.0 Kg

Power Supply:

AC mains through adaptor                                                                  2

Input : 150 – 276 VAC, 50 Hz, 1 Ø

Output : 17V @ 4 A.

Battery : 11.1 V 4Ah. Rechargable

Back-up time : 3 hours min. on full charge in ECG mode 70-100 shock

of 150 Joules deliveries (Full charge).

Power consumption : 30 Watts (max.) in ECG mode


Operating Temp. : -5ºC to +50 ºC

Humidity : up to 95 % non-condensing


Frequency response : 0.5 Hz to 35 Hz

Patient isolation : Optical isolation

Lead selection : Lead I, II and III

Gain setting : 0.5, 1.0 and 2.0

CMRR : :> 90 db

Sweep Speed : 12.5, 25.0, 50.0 mm/sec

Digital filter : Digital signal processing for good quality of ECG

NIBP Systolic, Diastolic and Mean arterial pressure.

Method : Oscillometric.

NIBP interval : User selectable – 3 min to 120 min

Modes : Manual, auto.

Cuff deflation : Automatic.

Safety features : Automatic deflation if cuff pressure exceeds

280 : mmHg

Patient Type : Adult, Pediatric, Neonate

Heart Rate:

Range : 10 – 250 BPM

Accuracy : +/- 2 BPM

Resolution : 1 BPM

Tone : Beep on every QRS detected

Low alarm limit range : 10 – 245 (step of 1)

High alarm limit range : 10 – 250 (step of 1)

SpO2 Plethysmograph trace of 4 seconds.

Range : 0 – 100%.

Accuracy : 70 – 100% +/-2% , 50 – 69% +/-3 %.

Pulse rate : displayed when PR is deselected.

Pulse beep : Stepless volume control.

PR Range : 30 to 250 bpm ( +/- 2 bpm )

Pitch variation : with change in oxygen saturation


Paper Type : Thermal paper 50/55mm width, 20 meters length for 2 inch printer

Event Printing : Prints 5 Seconds pre & post ECG with Date, Time, Energy and

mode, Shock Status

ECG in Defib Mode : Prints last 10sec ECG through paddle

Print Annotates : Time, Date, Mode, lead name, gain, sweep speed

in Defib Mode

ECG in Monitor Mode : Prints last 10 ECG through cable

Print Annotates : Time, Date, selected Lead name, Gain, Sweep speed

in Monitor Mode

Manual Defib : Prints the status of Shock, Energy, Date and Time


Operating Mode : Manual

Waveform : Biphasic

Energy : 2 to 200 joules in 12 steps selection

Synchronous : Energy delivery begins within 60 ms of the QRS Peak

Charging Time : Less than 8 seconds

Paddle Assembly : External paddle assembly with coil retractable high

voltage cable. Adults & Pediatric paddle integrated to

same handle

Check Mode : Manual test mode

Operation : By front Panel Keyboard, Encoder & ON-OFF by front

Panel Push button


Digital Spirometry Machine

Model: Spiro win

Manufacture: Nasan Medical Electronics Pvt. Ltd.

Country of Origin: India



A versatile, PC based pulmonary function testing machine for evaluating constrictive and restrictive pulmonary diseases. Supports pre and post medication testing with elaborate measurements as shown below.

Dimensions (mm):50 x 100 x 25
Weight: 0.25 Kg Spiro Win is the state-of-the-art PC Windows* based Pulmonary Function Analysis System with Interpretation. The system is useful to conduct FVC, SVC, MVV tests. It gives exhaustive information in terms of various parameters and  an accurate interpretation. It can analyze Medication responses of the pulmonary system of the patient with maximum possible ease of operation. The start of each maneuver is indicated to the patient by a Traffic light system. A unique patient target is software provides with Automatic / manual best test selection, detailed printing of F/V, V/T graphics, post analysis with overlapping of tests performed in different test sessions, Seven pre-defined and one user definable Predicted values etc. It also provides Internet connectivity with dedicated view software. can be viewed as a complete system dedicated to provide a simple solution for evaluation of pulmonary function and the effect of medication on the patient. Windows* based software, PC powered Hardware & serial port communication with the instrument turns any PC into a full-fledged Pulmonary function Analysis system, with online real time graphs on screen. It gives a / B&W two-page report on A4 size paper. In built patient database with more than 1000 patients memory helps you keep track of patient history. All at your mouse clicks in a incorporated to induce maximal patient effort. very user-friendly Spiro Win software environment

5 PARA Monitor (LED)

Model: Para 1005


  • Five waveforms on High-resolution Color TFT display.
  • Graphical & tabular trends.
  • In-built rechargeable battery.
  • Interface facility with central monitoring system.
  • Portable & easy to carry.
  • Available in 12.1″ Screen Size.